Linshang new multi-probe Leeb hardness tester probe type and characteristics

From:Linshang Time:2023/04/07 15:25:28 Browse:611

Recently, Linshang Technology newly launched a new instrument for measuring the hardness of metals - LS253 split multi-probe Leeb hardness tester. This LS253 multi-probe Leeb hardness tester breaks through the limitations of the previous pen hardness tester with one kind of probe for one application, and adopts a split design, which can be matched with four kinds of probes D/DC/DL/C, providing a more cost-effective solution for customers who need multiple applications. Next, through the introduction of LS253 Leeb hardness tester probe type and its characteristics to understand the new Linshang the new multi-probe Leeb hardness tester it.

LS253 multi-probe Leeb hardness tester
LS253 multi-probe Leeb hardness tester

LS253 multi-probe Leeb hardness tester probe type

LS253 Leeb hardness tester can be freely matched with a total of four types of probes, four different probes corresponding to different application scenarios, you can choose the appropriate probe according to the following tips.

  • D-type probe: mainly applicable to the hardness measurement of some common metal materials, general metal parts can be measured, such as cast iron blocks, low carbon alloy steel, coarse metal pipes, oil storage tanks, rolls, boiler pressure vessels and other metal materials.

  • DC type probe: DC type probe is shorter and smaller in size, mainly suitable for measuring the hardness of internal holes and narrow parts. For example, the metal material in the position of automobile wheel hub, inner cavity, narrow space of mechanical parts, etc.

  • DL type probe: DL type probe is slender in size, mainly suitable for measuring the hardness of slim and narrow grooves, gear surface, bottom of bore and other parts. For example, gear tooth surface, large bearings, machine tool spindle hole wall and groove bottom and other metal materials.

  • C-type probe: C-type probe has a smaller impact, mainly suitable for measuring the hardness of surface hardening layer or parts with small or thin mass. For example, metal materials for teaching or research, machine tool guide, heat treatment of the mold and other metal materials.

probe type
probe type

LS253 multi-probe Leeb hardness tester features

  1. The instrument is equipped with a Bluetooth printer, which supports the printing of measurement results, and the measurement results can be printed directly on site

  2. The instrument is equipped with a cell phone APP, connected to the cell phone APP through Bluetooth, can store a large amount of data, measurement data can be shared

  3. A variety of probe optional, the instrument supports D/DC/DL/C four kinds of probe connection, you can choose any combination, the instrument will automatically identify the probe type to ensure that the data is error-free.

  4. A variety of hardness system conversion, the instrument has a variety of built-in hardness system, but also can measure the strength of the metal, eliminating the need to manually check the table conversion

  5. Using advanced digital probe technology, digital signal processing directly on the probe to complete, the probe is not easy to interference and provide excellent test accuracy

  6. User calibration, through the calibration of the standard block provided by the instrument, can eliminate the error, the measurement data is still accurate

  7. Can be tested by the national metrology institute, the instrument measurement accuracy can reach up to ± 6HL, measurement accuracy, to ensure that the national authority through the metrology institute testing

Multi-probe Leeb hardness tester actual measurement

Multi-probe Leeb hardness tester actual measurement

Multi-probe Leeb hardness tester mobile app

Multi-probe Leeb hardness tester mobile app

The above is the introduction of the new LS253 Leeb hardness tester probe type and its characteristics of all content.